These key combinations apply only to Mac computers with an Intel processor.

• Mac Choose Boot Device
• Download Boot Disk For Mac
• Boot Disk Utility Mac

To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs. Anydesk mac to windows.

• Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
  
• Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
  
• Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
• Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
• D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
• N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
• Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
• T: Start up in target disk mode. Disabled when using a firmware password.
• Command-V: Start up in verbose mode. Disabled when using a firmware password.
• Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.

If a key combination doesn't work

If a key combination doesn't work at startup, one of these these solutions might help:

• Press and hold all keys in the combination together, not one at a time.
• Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
• Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
• If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
• If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.

Method 3: Use Boot Camp Assistant on Mac. If you wish to know how to make a bootable USB Windows 10 on Mac using Boot Camp Assistant, read on. Corelcad 2017 5 – reasonably priced cad solution for beginners. You will need to have a USB drive with a storage capacity of 16 GB or more for this method to work. You can use the following steps to know how to make a Windows 10 bootable USB on Mac using Bootcamp. Make a connection. To format an external storage device, connect it to one of the ports on your. Trapcode suite 15 1 6 cc.

Remember that some key combinations are disabled when your Mac is using a firmware password.

Learn more

• Learn what to do if your Mac doesn't turn on.
• Learn about Mac keyboard shortcuts that you can use after your Mac has started up.

Oct 16, 2020 • Filed to: Solve Mac Problems • Proven solutions

Recovery Mode in OS X provides a set of solutions for users to utilize when users need to repair and reinstall their operating system in an emergency. You can also reset the Mac password Lan camera software. using recovery mode if needed. There are several ways to boot Mac into recovery mode. If you find one method overwhelming, there are several other alternatives you can use. We will walk you through the different ways on how to boot Mac into recovery mode so that they will become undoubtedly useful in a rare emergency.

Part 1: How to Boot Mac in Internet Recovery Mode

Along with the introduction of a locally stored recovery volume, Apple introduced its Internet Recovery service that allows your operating system to download contents of the recovery hard disk partition from the company's service. This option is great to use when your local drive is completely corrupted and you no longer can access locally-stored recovery tools.

To launch Internet Recovery, make sure your Mac is connected to a WiFi network and follow the steps below:

1. Reboot your Mac.
2. Hold the 'Options', 'Command', and 'R' buttons until the boot chimes are triggered.
3. Wait until the system finished downloading the recovery tools from Apple's website.

It is noted that you are unable to boot Mac into Recovery Mode if you are using devices older than the ones below:

• MacBook Pro (13-inch, Early 2011)
• MacBook Pro (15-inch, Early 2011)
• MacBook Pro (17-inch, Early 2011)
• iMac (21.5-inch, Mid 2011)
• iMac (27-inch, Mid 2011)
• MacBook (13-inch, Mid 2010)
• MacBook Pro (13-inch, Mid 2010)
• Mac mini (Mid 2010)
• MacBook Pro (15-inch and 17-inch, Mid 2010)
• iMac (21.5-inch and 27-inch, Mid 2010)
• MacBook Air (11-inch and 13-inch, Late 2010)

Part 2: How to Create a bootable drive into Recovery Mode

You can create a bootable drive to store an OS X Recovery Disk so that you can access recovery tools anytime, anywhere. It would be great if you could invest in a high-capacity USB 3.0 flash drive to store the required tools.

There are plenty of articles outlining how you can create a bootable OS X Recovery Disk, including ours. Once you have this established, you can follow these steps to get your Mac into Recovery Mode:

1. Reboot your Mac.
2. Hold down 'Option' on your keyboard once you hear the chime sound.
3. Attach your bootable OS X Recovery Disk to your Mac and select it from the prompt list.
4. Your Mac will launch into Recovery Mode and you can start fixing your Mac.

As you can see, there are plenty of methods you can use to boot Mac into Recovery Mode. There is no need to panic when you find yourself in trouble - just choose and master the method that seems least intimidating to you and you will be well on your way. After you boot Mac into Recovery Mode, you can also restore your data on Mac.

Part 3: How to Boot Mac with Installation Disk

If you are using an older Mac, it probably comes with a grey recovery DVD that you can use to run recovery routines. If you had bought a copy of a newer operating system, you can also use the installation disk to perform recovery.

It is the easiest way to go into Recovery Mode and here is how you can do it:

1. Insert the grey DVD and reboot your Mac.
2. Hold down 'C' on your keyboard until you hear the boot chimes.

The recovery tool will take some time to load. Follow the wizard that will put your Mac into Recovery Mode.

Part 4: How to Boot Mac into Recovery Mode with Local Recovery

1. Reboot your Mac.
2. Hold the 'Command' and 'R' buttons until the boot chimes are triggered.
3. You will see the OS X utility window that will prompt you to choose one of the four options.

Part 5: How to Boot Mac into Recovery Mode from Time Machine

It is really important to keep backups of your machine and Apple facilitates this with its Time Machine feature. It would be best to store your backup on an external drive so that you can initiate Recovery Mode using this when your hard drive is wiped out.

Follow these steps to boot Mac into Recovery Mode:

1. Reboot your Mac.
2. Hold down the Option button when the startup chimes sound.
3. Connect your Time Machine drive. It will take some time for the system to detect the drive. You might need to key in your password.
4. Choose the drive to launch your Mac into Recovery Mode.

Mac Choose Boot Device

After all the above methods, you finally fail to boot your Mac into Recovery mode. Don't worry. We also provide further solutions for you - Fix 'Cannot boot into Recovery mode'. For those who need the data recovery solution, Recoverit would be a nice option. Free download and try it now.

Download Boot Disk For Mac

Video Tutorial on How to Boot Mac into Recovery Mode

What's Wrong with Mac

Boot Disk Utility Mac

Recover Your Mac

Fix Your Mac

Delete Your Mac

Learn Mac Hacks